AirHead - 12.5 ton bench top “C” frame punch press and circle blanking tool

Made to order . Blanking tool to cut 2” diameter flat blanks

No electrical power required, only compressed shop air

C-Frame Punch Press Configuration

Total weight: 235 lb

Operator control: Dual push buttons

• 12.5 ton air overoil cylinder bench top punch press 
• Power source: Compressed shop air at 100 psi
• Quick connect to air supply
• Tonnage (max. output): 12.5 ton @120 psi
• Stroke: 5/8"
• Power stroke: 9/32"
• Cycle time: 40 - 45 SPM
• Adjustable speed control
• Custom silencer with blast guard
• Wrench for the cylinder’s lock ring
• Top of the line SMC FRL is to protect and to ensure the long service life of the cylinder.
• Bolster size: 12”x 8.5”
• Punch press workspace height: 8.25"
• Total height of the press: 38.5"

• Two post guided die set with spring return
• Compound style blanking to keep the cut parts flat
• Visual guide (line) as 1st stop for each blank inserted
• Hook up stop for progression control
• Back guide bar to slide the strip against
• Feed in and feed out strip rest for convenience
• Strip thickness: 0.5 or 1 mm thick Thorium 
• Strip (blank) size: 100 x 300 mm
• Tool has 4 bolts to mount and or to remove from the press

Vortool Manufacturing Ltd.

Unit 240 19358-96 Ave.

Surrey, BC V4N 4C1 Canada

Call: 604-239-7218 | Email

Made in Canada

 

20 ton custom air over oil shop air three platen flatbed benchtop die cutting press

20 ton custom air over oil shop air three platen flatbed benchtop die cutting press for steel rule die for cutting out shapes

• Cylinder: Multicyl - 20 tons capacity, 1” overall stroke, 3/8” power stroke
• Structure: Three platen, four post, precision guided die set with pre-set cut depth
• Power source: Compressed air, 120 psi (max) adjust able by mounted FRL
• Connection type to air: “M” style quick connect
• Press style: Bench mount
• Operator control: Two push buttons
• Feed in/out: Manual, visually controlled

Foot print: 18" x 18"

Height: 43"

Weight: 500 lbs

Vortool Manufacturing Ltd.

Unit 240 19358-96 Ave.

Surrey, BC V4N 4C1 Canada

Call: 604-239-7218 | Email

Made in Canada

Rotary bender forming tool

A three station rotary bender forming tool was designed and manufactured by Vortool Manufacturing. Made in Canada.

This form tool is the second tool for the part operation. The previously stamped aluminum flat bars are being bent here in three side by side stations.

The tool's foot print is 16" x 28". The nearly 33" long flat bar needs to be bent into a kind of "U" shape, so the tool require enough inner space for the part to fit once bent. The overall height of the tool is 32 inches. The tool is designed to operate in a 50 ton hydraulic "H" frame press.

The first station in this tool is to process the shorter part that was made with the previous tool. The required shape was being done in a single stroke.

The longer part needed two stations. In the middle station the two ends of the aluminum flat bar was bent at 3 places. The third station was designed and built to bend the parts to a "U" shape with 18 degrees over bend.

Standard wipe form style tooling could bend only up to 90 degrees or rather less as most material has some degree of spring back. This rotary bender employed a custom designed and built pair of rotary benders, allowing a great amount of over bend.

The tool has 6 lifter springs on top to automatically open the tool after each stroke. Most "H" frame presses use a bottle jack style hydraulic cylinder, so it can push things downward but can't pull. The auxiliary springs overcome this problem and lift the tool to open position by default.

Vortool Manufacturing Ltd.

Unit 240 19358-96 Ave.

Surrey, BC V4N 4C1 Canada

Call: 604-239-7218 | Email

Made in Canada