Laboratory custom pneumatic flat bed press for small steel rule die

Laboratory custom pneumatic flat bed press for small steel rule die

Laboratory custom pneumatic flat bed press for small steel rule die

  • Specialty pneumatic press for a small steel rule die

  • 1,500 lbs pressure

  • Air cylinder bore: 3.94"

  • Air cylinder stroke: 3.15"

  • Air pressure: 130 psi max, adjustable by 
  • FRL
Operating air pressure: 100 psi

  • Quick connect to air supply by “M” style connector

  • Press has a positive stop plus fine adjustment for stoke length

  • Operated by two push buttons

  • Weight: 117 lbs

  • Dimensions: 10” x 20” x 21” tall


Punch small cutout shapes. Designed, manufactured and made to order by Vortool Manufacturing in Surrey, BC, Canada.


Punching cutout holes in plastic phone cases

Laboratory custom pneumatic flat bed press for small steel rule die

Laboratory custom pneumatic flat bed press for small steel rule die



Vortool Manufacturing

Vortool Manufacturing Ltd.

Unit 240 19358-96 Ave.

Surrey, BC V4N 4C1 Canada


Call: 604-239-7218 | Email


Made in Canada

 

Multiple set punch metal stamping die


Multiple set punch metal stamping die by Vortool Manufacturing. Made in Canada. Quality. Precision.

Multiple set punch metal stamping die

Multi set punch metal stamping die

Multiple set punch metal stamping die

Save money with a multi set up metal stamping die. 
It can punch different set of holes in two different lengths of metal.

This metal stamping die was designed and manufactured by Vortool Manufacturing. 


Vortool Manufacturing

Vortool Manufacturing Ltd.

Unit 240 19358-96 Ave.

Surrey, BC V4N 4C1 Canada


Call: 604-239-7218 | Email


Made in Canada


Bench top swaging pneumatic punch press

Bench top swaging pneumatic press

Bench top swaging pneumatic press

This compact benchtop pneumatic punch press has a push down ram by hand to pre-align before striking with full air power. No electrical power required, only compressed shop air.
  • 0.8 ton max. output
  • Air Cylinder Bore: 3.15"
  • Air Cylinder Stroke: 3.94" max.
  • Air Pressure: 130 psi max, adjustable by FRL
  • Quick connect to air supply (“M” style)
  • Operated by a directional toggle switch plus two safety palm buttons to activate cylinder
  • Weight: 143 lbs
  • Dimensions: 21" x 27" x 22.5"
Designed, manufactured and made to order by Vortool Manufacturing in Surrey, BC

Bench top swaging pneumatic press

Bench top swaging pneumatic press



Vortool Manufacturing

Vortool Manufacturing Ltd.

Unit 240 19358-96 Ave.

Surrey, BC V4N 4C1 Canada


Call: 604-239-7218 | Email


Made in Canada