20 ton custom air over oil shop air three platen flatbed benchtop die cutting press

20 ton custom air over oil shop air three platen flatbed benchtop die cutting press for steel rule die for cutting out shapes

20 ton custom air over oil shop air three platen flatbed benchtop die cutting press for steel rule die for cutting out shapes

  • Cylinder: Multicyl - 20 tons capacity, 1” overall stroke, 3/8” power stroke
  • Structure: Three platen, four post, precision guided die set with pre-set cut depth
  • Power source: Compressed air, 120 psi (max) adjust able by mounted FRL
  • Connection type to air: “M” style quick connect
  • Press style: Bench mount
  • Operator control: Two push buttons
  • Feed in/out: Manual, visually controlled

Foot print: 18" x 18"

Height: 43"

Weight: 500 lbs

Vortool Manufacturing

Vortool Manufacturing Ltd.

Unit 240 19358-96 Ave.

Surrey, BC V4N 4C1 Canada


Call: 604-239-7218 | Email


Made in Canada

Rotary bender forming tool

Rotary bender forming tool


A three station rotary bender forming tool was designed and manufactured by Vortool Manufacturing. Made in Canada.

This form tool is the second tool for the part operation. The previously stamped aluminum flat bars are being bent here in three side by side stations.

The tool's foot print is 16" x 28". The nearly 33" long flat bar needs to be bent into a kind of "U" shape, so the tool require enough inner space for the part to fit once bent. The overall height of the tool is 32 inches. The tool is designed to operate in a 50 ton hydraulic "H" frame press.

The first station in this tool is to process the shorter part that was made with the previous tool. The required shape was being done in a single stroke.

The longer part needed two stations. In the middle station the two ends of the aluminum flat bar was bent at 3 places. The third station was designed and built to bend the parts to a "U" shape with 18 degrees over bend.


Rotary bender forming tool


Standard wipe form style tooling could bend only up to 90 degrees or rather less as most material has some degree of spring back. This rotary bender employed a custom designed and built pair of rotary benders, allowing a great amount of over bend.

The tool has 6 lifter springs on top to automatically open the tool after each stroke. Most "H" frame presses use a bottle jack style hydraulic cylinder, so it can push things downward but can't pull. The auxiliary springs overcome this problem and lift the tool to open position by default.


Vortool Manufacturing

Vortool Manufacturing Ltd.

Unit 240 19358-96 Ave.

Surrey, BC V4N 4C1 Canada


Call: 604-239-7218 | Email


Made in Canada



Laboratory custom pneumatic flat bed press for small steel rule die

Laboratory custom pneumatic flat bed press for small steel rule die

Laboratory custom pneumatic flat bed press for small steel rule die

  • Specialty pneumatic press for a small steel rule die

  • 1,500 lbs pressure

  • Air cylinder bore: 3.94"

  • Air cylinder stroke: 3.15"

  • Air pressure: 130 psi max, adjustable by 
  • FRL
Operating air pressure: 100 psi

  • Quick connect to air supply by “M” style connector

  • Press has a positive stop plus fine adjustment for stoke length

  • Operated by two push buttons

  • Weight: 117 lbs

  • Dimensions: 10” x 20” x 21” tall


Punch small cutout shapes. Designed, manufactured and made to order by Vortool Manufacturing in Surrey, BC, Canada.


Punching cutout holes in plastic phone cases

Laboratory custom pneumatic flat bed press for small steel rule die

Laboratory custom pneumatic flat bed press for small steel rule die



Vortool Manufacturing

Vortool Manufacturing Ltd.

Unit 240 19358-96 Ave.

Surrey, BC V4N 4C1 Canada


Call: 604-239-7218 | Email


Made in Canada

 

Multiple set punch metal stamping die


Multiple set punch metal stamping die by Vortool Manufacturing. Made in Canada. Quality. Precision.

Multiple set punch metal stamping die

Multi set punch metal stamping die

Multiple set punch metal stamping die

Save money with a multi set up metal stamping die. 
It can punch different set of holes in two different lengths of metal.

This metal stamping die was designed and manufactured by Vortool Manufacturing. 


Vortool Manufacturing

Vortool Manufacturing Ltd.

Unit 240 19358-96 Ave.

Surrey, BC V4N 4C1 Canada


Call: 604-239-7218 | Email


Made in Canada


Bench top swaging pneumatic punch press

Bench top swaging pneumatic press

Bench top swaging pneumatic press

This compact benchtop pneumatic punch press has a push down ram by hand to pre-align before striking with full air power. No electrical power required, only compressed shop air.
  • 0.8 ton max. output
  • Air Cylinder Bore: 3.15"
  • Air Cylinder Stroke: 3.94" max.
  • Air Pressure: 130 psi max, adjustable by FRL
  • Quick connect to air supply (“M” style)
  • Operated by a directional toggle switch plus two safety palm buttons to activate cylinder
  • Weight: 143 lbs
  • Dimensions: 21" x 27" x 22.5"
Designed, manufactured and made to order by Vortool Manufacturing in Surrey, BC

Bench top swaging pneumatic press

Bench top swaging pneumatic press



Vortool Manufacturing

Vortool Manufacturing Ltd.

Unit 240 19358-96 Ave.

Surrey, BC V4N 4C1 Canada


Call: 604-239-7218 | Email


Made in Canada