C-frame punch press and dimple hole stamping tool and die for metal door frames

Multicyl cylinder C-frame punch press

• Air over oil “C” frame bench top punch press

• Tonnage (output): 12.5 ton capacity at 120 psi

• Power requirement: compressed air, 90-120 psi

• Operator control: Foot pedal

• “M” style quick connect to air supply

• FRL to filter air supply, regulate air pressure and lubricate

Metal stamping tool and die

• Punching single dimple holes in 16 – 14 ga thick metal door of different profile sizes, up to 9-1/2 frame

• Tool is easily removable from the press and can be replaced with different sizes if needed. 

Vortool Manufacturing Ltd.

Unit 240 19358-96 Ave.

Surrey, BC V4N 4C1 Canada

Call: 604-239-7218 | Email

Made in Canada

AirHead - 12.5 ton bench top “C” frame punch press and circle blanking tool

Made to order . Blanking tool to cut 2” diameter flat blanks

No electrical power required, only compressed shop air

C-Frame Punch Press Configuration

Total weight: 235 lb

Operator control: Dual push buttons

• 12.5 ton air overoil cylinder bench top punch press 
• Power source: Compressed shop air at 100 psi
• Quick connect to air supply
• Tonnage (max. output): 12.5 ton @120 psi
• Stroke: 5/8"
• Power stroke: 9/32"
• Cycle time: 40 - 45 SPM
• Adjustable speed control
• Custom silencer with blast guard
• Wrench for the cylinder’s lock ring
• Top of the line SMC FRL is to protect and to ensure the long service life of the cylinder.
• Bolster size: 12”x 8.5”
• Punch press workspace height: 8.25"
• Total height of the press: 38.5"

• Two post guided die set with spring return
• Compound style blanking to keep the cut parts flat
• Visual guide (line) as 1st stop for each blank inserted
• Hook up stop for progression control
• Back guide bar to slide the strip against
• Feed in and feed out strip rest for convenience
• Strip thickness: 0.5 or 1 mm thick Thorium 
• Strip (blank) size: 100 x 300 mm
• Tool has 4 bolts to mount and or to remove from the press

Vortool Manufacturing Ltd.

Unit 240 19358-96 Ave.

Surrey, BC V4N 4C1 Canada

Call: 604-239-7218 | Email

Made in Canada

 

20 ton custom air over oil shop air three platen flatbed benchtop die cutting press

20 ton custom air over oil shop air three platen flatbed benchtop die cutting press for steel rule die for cutting out shapes

• Cylinder: Multicyl - 20 tons capacity, 1” overall stroke, 3/8” power stroke
• Structure: Three platen, four post, precision guided die set with pre-set cut depth
• Power source: Compressed air, 120 psi (max) adjust able by mounted FRL
• Connection type to air: “M” style quick connect
• Press style: Bench mount
• Operator control: Two push buttons
• Feed in/out: Manual, visually controlled

Foot print: 18" x 18"

Height: 43"

Weight: 500 lbs

Vortool Manufacturing Ltd.

Unit 240 19358-96 Ave.

Surrey, BC V4N 4C1 Canada

Call: 604-239-7218 | Email

Made in Canada

Bench top swaging pneumatic punch press

Bench top swaging pneumatic press

This compact benchtop pneumatic punch press has a push down ram by hand to pre-align before striking with full air power. No electrical power required, only compressed shop air.

• 0.8 ton max. output
• Air Cylinder Bore: 3.15"
• Air Cylinder Stroke: 3.94" max.
• Air Pressure: 130 psi max, adjustable by FRL
• Quick connect to air supply (“M” style)
• Operated by a directional toggle switch plus two safety palm buttons to activate cylinder
• Weight: 143 lbs
• Dimensions: 21" x 27" x 22.5"

Designed, manufactured and made to order by Vortool Manufacturing in Surrey, BC

Vortool Manufacturing Ltd.

Unit 240 19358-96 Ave.

Surrey, BC V4N 4C1 Canada

Call: 604-239-7218 | Email

Made in Canada

12 ton flatbed die cutting punch press for steel rule die

12.5 ton three platen flatbed die cutting press and steel rule die specifications

• Steel rule die size: 6.5" x 15"



• Cylinder: 
12.5 tons capacity, 5
/8 overall stroke,
7/32 power stroke



• Structure: Three platen, four post, precision guided die set with pre-set cut depth



• Power source: Compressed air, 120 psi (max), adjustable psi by mounted FRL

• Connection type to air in: “M” style quick connect



• Press style: Bench mount with adjust able height platforms



• Operator control: Two push buttons



• Additional safety: Lexan guards, all sides



• Feed in/out: Manual, visually controlled, rolls or individual blanks or sheets



• Outboard strip support: Comes with two basic wooden platforms. Other sizes or materials are optional.

• Steel rule die (cuts the shape)

• Metal cutting board

Flatbed die cutting press and steel rule die cutout material into custom shapes and designs.

Foot print: 14" x 25"

Total height: 35"

Weight: 525 lbs

Vortool Manufacturing Ltd.

Unit 240 19358-96 Ave.

Surrey, BC V4N 4C1 Canada

Call: 604-239-7218 | Email

Manufactured in Canada

Custom precision 7.5 ton benchtop flatbed die cutting press for steel rule die

Flatbed die cutting press and steel rule die to cutout material into custom shapes and designs

Cylinder: Multicyl 7.5 tons capacity, 5/8 overall stroke, 9/32 power stroke
Structure: Three platen, four post, precision guided die set with pre-set cut depth
Connection type to air in: “M” style quick connect
Total height: 33.5
Weight: 250 lbs

Power source: Compressed air, 120 psi (max), set to 100 psi by mounted FRL.

Press style: Bench mount with adjust able height platforms

Operator control: Two push buttons

Feed in/out: Manual, visually controlled, rolls or individual blanks or sheets

Foot print: 14.75 x 17.375

Vortool Manufacturing Ltd.

Unit 240 19358-96 Ave.

Surrey, BC V4N 4C1 Canada

Call: 604-239-7218 | Email

Made in Canada

Benchtop pneumatic coax cable compression crimping tool / press

Crimping made easy with bench top pneumatic coax cable compression crimping tool and press.

It's used to terminate a stripped coaxial cable by pushing the connector firmly onto the stripped cable.

Vortool Manufacturing Ltd.

Unit 240 19358-96 Ave.

Surrey, BC V4N 4C1 Canada

Call: 604-239-7218 | Email

Made in Canada

Plastic stamping tooling and portable press station

Airhead 12-16-7 - 6 ton air to oil cylinder portable press station with custom stamping die

• 6 ton air-oil cylinder bench top press mounted on sturdy metal frame table

• Power source: Compressed shop air at 100 psi

• Quick connect to air supply

• Tonnage (output):

• 6 ton @120 psi, 5 ton @ 100 psi, 4 ton @ 80 psi

• Stroke: 2"

• Power stroke: 7/32"

• Cycle time: 40 - 45 SPM

• A top of the line FRL is to protect and to ensure the long service life of the cylinder

• Press size workspace inside: 10 x 14.5"

• Press workspace height: 9.5"

• Total height of the table and press: 68"

• Total weight: 300 lb

• Table Size: 24 wide x 24 wide x 36" tall

• Casters included, 2 rigid and 2 swivel and locking

• Option to permanently anchor table to floor, if casters removed

• Operator control: Foot pedal

• Bucket to collect slugs

Multi tip plastic cap hole stamping tooling

Vortool Manufacturing Ltd.

Unit 240 19358-96 Ave.

Surrey, BC V4N 4C1 Canada

Call: 604-239-7218 | Email

Made in Canada

Custom oil to air mandrel punch press station for aluminum tubing

Custom oil to air mandrel punch press station for aluminum tubing video by Vortool Manufacturing.

Vortool Manufacturing Ltd.

Unit 240 19358-96 Ave.

Surrey, BC V4N 4C1 Canada

Call: 604-239-7218 | Email

Made in Canada

Custom portable air-oil cylinder / shop air punch press station

Custom portable air-oil cylinder / shop air punch press station

Operating the 7 ton air-oil cylinder punch press and multi station die tooling for punching holes in aluminum tubes video.

Designed and manufactured by Vortool Manufacturing.

Vortool Manufacturing Ltd.

Unit 240 19358-96 Ave.

Surrey, BC V4N 4C1 Canada

Call: 604-239-7218 | Email

Made in Canada

0.8 ton custom table top pneumatic press

 

Custom Benchtop Pneumatic Press

This custom benchtop pneumatic shop air press is designed to push down ram by hand to pre-align before striking with full air power. No electrical power required, only compressed shop air.

• 0.8 ton
• Air cylinder bore: 3.15"
• Air cylinder stroke: 3.94"
• Air pressure: 130 psi max, adjustable by FRL
• Base to RAM distance: 3.6"
• Operated by a toggle switch
• Weight: 75 lbs
• Dimensions: 14 x 16 x 19"

Designed and manufactured by Vortool Manufacturing.

Contact us if you are interested in having something similar designed and made for your specific needs.

Vortool Manufacturing Ltd.

Unit 240 19358-96 Ave.

Surrey, BC V4N 4C1 Canada

Call: 604-239-7218 | Email

Made in Canada

Metal stamping tool and die design considerations

When designing metal stamping dies a tool and die maker or tool and die designer must have the following information prior to start. There are several types of tools that could be built for the same part. They have special purposes to best suit both parts and metal stamping production.

The cost of the tool and die to be produced may be greatly affected by the following considerations:

Estimated number of metal stamped parts the tool and die should produce monthly, yearly, or in total

Eg. if the customer needs 2000 parts in total and possibly never again, then it is not wise to build a tool designed for high volume metal stamping and productivity. Make something simple and inexpensive, yet produce the correct metal stamped parts.

If the amount of 2000 is for a day or for a week and possibly for many years to come, then you must build a tool that lasts, very efficient and easy to use or has the capability for automation. The customer may have a request for manual, semi-automated or fully automated part production.

The quality of the metal stamping part

Some production parts may require absolute burr-free edges without a second operation to remove the burrs. Some metal stamping production parts require straight edges all the way. Other stamped parts have such tight specifications that special tools need to be built for that request.

Punch press

The metal stamping die must physically fit the punch press it is intended for, so you need the punch press specifications that may limit how you build the tool.

The metal stamping part itself

Some metal stamped parts are best suited for a certain type of tool and die design for the best result. Don’t try to build something else, if you are not sure of the outcome. To decide what type is the best for that part, take a look at the sample designs, made for the same part. Vortool Manufacturing will discuss each version’s strong points that can help you to make a decision about which to choose.

Vortool Manufacturing Ltd.

Unit 240 19358-96 Ave.

Surrey, BC V4N 4C1 Canada

Call: 604-239-7218 | Email

Made in Canada

AirHEAD 5 - 4 ton benchtop pneumatic box frame punch press with 6" stroke

4 ton bench top pneumatic box frame punch press with 6" stroke

Made to order and ships in 3-4 weeks.

Shipped assembled - plug in and play.

Starting at $6985*

*Plus crate $250 / actual shipping cost / customs (if applicable) or taxes. We ship anywhere in Canada and the United States. Funds are in Canadian dollars.

4 Ton Pneumatic Press Specifications

• Required compressed air (input), 100 psi
• Capacity: 7,618 force in lbs (3.8 tons) at 100 psi
• Stroke: 6"
• Workspace: 14 x 12 x 8"
• Actuator: Two push buttons
• Storage dimensions: 23 x 24 x 53"
• Weight: 250 lbs
• Additional information for hole locations: bolster plate, bottom mounting bars and striker head.

Vortool Manufacturing Ltd.

Unit 240 19358-96 Ave.

Surrey, BC V4N 4C1 Canada

Call: 604-239-7218 | Email

Made in Canada