Showing posts with label custom. Show all posts
Showing posts with label custom. Show all posts

Metal stamping dies

Metal stamping dies can punch various materials such as metal, plastics, paper, etc.. Materials can come in a form of sheet, strip or coil. They can be shaped, like tubing, extrusions, channels, etc.

Multi set up metal stamping die for punching holes


Double D hole punching tool and die

Double D hole punching tool and die


Metal stamping tool to punch oblong holes in curved aluminum extrusion

Metal stamping tool to punch oblong holes in curved aluminum extrusion


Multiple station hole punching mandrel tooling of aluminum tubes

Multiple station hole punching mandrel tooling for aluminum tubes


Ball End Wire Rope Crimping and Swaging Die

Ball end wire rope crimping and swaging die


Metal punching tool and die.
Custom metal stamping die

Progressive stamping tool and die.
Progressive metal stamping die

Custom hole punching tool and die.

Blanking and piercing tool and die. Made in Canada.

Metal stamping die manufacturer.

Sheet metal stamping die manufacturing. Made in Canada.

Metal stamping die made in Canada by Vortool

Progressive tool and die design and manufacturing by Vortool



Vortool Manufacturing

Vortool Manufacturing Ltd.

Unit 240 19358-96 Ave.

Surrey, BC V4N 4C1 Canada


Call: 604-239-7218 | Email


Made in Canada

Laboratory custom pneumatic flat bed press for small steel rule die

Laboratory custom pneumatic flat bed press for small steel rule die

Laboratory custom pneumatic flat bed press for small steel rule die

  • Specialty pneumatic press for a small steel rule die

  • 1,500 lbs pressure

  • Air cylinder bore: 3.94"

  • Air cylinder stroke: 3.15"

  • Air pressure: 130 psi max, adjustable by 
  • FRL
Operating air pressure: 100 psi

  • Quick connect to air supply by “M” style connector

  • Press has a positive stop plus fine adjustment for stoke length

  • Operated by two push buttons

  • Weight: 117 lbs

  • Dimensions: 10” x 20” x 21” tall


Punch small cutout shapes. Designed, manufactured and made to order by Vortool Manufacturing in Surrey, BC, Canada.


Punching cutout holes in plastic phone cases

Laboratory custom pneumatic flat bed press for small steel rule die

Laboratory custom pneumatic flat bed press for small steel rule die



Vortool Manufacturing

Vortool Manufacturing Ltd.

Unit 240 19358-96 Ave.

Surrey, BC V4N 4C1 Canada


Call: 604-239-7218 | Email


Made in Canada

 

Bench top swaging pneumatic punch press

Bench top swaging pneumatic press

Bench top swaging pneumatic press

This compact benchtop pneumatic punch press has a push down ram by hand to pre-align before striking with full air power. No electrical power required, only compressed shop air.
  • 0.8 ton max. output
  • Air Cylinder Bore: 3.15"
  • Air Cylinder Stroke: 3.94" max.
  • Air Pressure: 130 psi max, adjustable by FRL
  • Quick connect to air supply (“M” style)
  • Operated by a directional toggle switch plus two safety palm buttons to activate cylinder
  • Weight: 143 lbs
  • Dimensions: 21" x 27" x 22.5"
Designed, manufactured and made to order by Vortool Manufacturing in Surrey, BC

Bench top swaging pneumatic press

Bench top swaging pneumatic press



Vortool Manufacturing

Vortool Manufacturing Ltd.

Unit 240 19358-96 Ave.

Surrey, BC V4N 4C1 Canada


Call: 604-239-7218 | Email


Made in Canada


12 ton flatbed die cutting punch press for steel rule die

12 ton flatbed die cutting press for steel rule die

12.5 ton three platen flatbed die cutting press and steel rule die specifications

  • Steel rule die size: 6.5" x 15"


  • Cylinder: 
12.5 tons capacity, 5
/8 overall stroke,
7/32 power stroke


  • Structure: Three platen, four post, precision guided die set with pre-set cut depth


  • Power source: Compressed air, 120 psi (max), adjustable psi by mounted FRL
  • Connection type to air in: “M” style quick connect


  • Press style: Bench mount with adjust able height platforms


  • Operator control: Two push buttons


  • Additional safety: Lexan guards, all sides


  • Feed in/out: Manual, visually controlled, rolls or individual blanks or sheets


  • Outboard strip support: Comes with two basic wooden platforms. Other sizes or materials are optional.
  • Steel rule die (cuts the shape)
  • Metal cutting board


Flatbed die cutting press and steel rule die cutout material into custom shapes and designs.

Foot print: 14" x 25"

Total height: 35"

Weight: 525 lbs


Vortool Manufacturing

Vortool Manufacturing Ltd.

Unit 240 19358-96 Ave.

Surrey, BC V4N 4C1 Canada


Call: 604-239-7218 | Email


Manufactured in Canada

Custom precision 7.5 ton benchtop flatbed die cutting press for steel rule die

Custom precision 7.5 ton benchtop flatbed die cutting press for steel rule die

Flatbed die cutting press and steel rule die to cutout material into custom shapes and designs

Cylinder: Multicyl 7.5 tons capacity, 5/8 overall stroke, 9/32 power stroke
Structure: Three platen, four post, precision guided die set with pre-set cut depth
Connection type to air in: “M” style quick connect
Total height: 33.5
Weight: 250 lbs


Power source: Compressed air, 120 psi (max), set to 100 psi by mounted FRL.

Press style: Bench mount with adjust able height platforms

Operator control: Two push buttons

Feed in/out: Manual, visually controlled, rolls or individual blanks or sheets

Foot print: 14.75 x 17.375


Steel rule die


Steel rule die press




Vortool Manufacturing

Vortool Manufacturing Ltd.

Unit 240 19358-96 Ave.

Surrey, BC V4N 4C1 Canada


Call: 604-239-7218 | Email


Made in Canada


0.8 ton custom table top pneumatic press


 Custom Benchtop Pneumatic Press

Custom Benchtop Pneumatic Press

Custom Benchtop Pneumatic Press

Custom Benchtop Pneumatic Press

This custom benchtop pneumatic shop air press is designed to push down ram by hand to pre-align before striking with full air power. No electrical power required, only compressed shop air.

  • 0.8 ton
  • Air cylinder bore: 3.15"
  • Air cylinder stroke: 3.94"
  • Air pressure: 130 psi max, adjustable by FRL
  • Base to RAM distance: 3.6"
  • Operated by a toggle switch
  • Weight: 75 lbs
  • Dimensions: 14 x 16 x 19"

Designed and manufactured by Vortool Manufacturing.

Contact us if you are interested in having something similar designed and made for your specific needs.



Vortool Manufacturing

Vortool Manufacturing Ltd.

Unit 240 19358-96 Ave.

Surrey, BC V4N 4C1 Canada


Call: 604-239-7218 | Email


Made in Canada



AirHEAD 5 - 4 ton benchtop pneumatic box frame punch press with 6" stroke

AirHead 4 ton bench top pneumatic box frame punch press 6" stroke

4 ton bench top pneumatic box frame punch press with 6" stroke

Made to order and ships in 3-4 weeks.

Shipped assembled - plug in and play.


Starting at $6985*
*Plus crate $250 / actual shipping cost / customs (if applicable) or taxes. We ship anywhere in Canada and the United States. Funds are in Canadian dollars.


4 Ton Pneumatic Press Specifications

  • Required compressed air (input), 100 psi
  • Capacity: 7,618 force in lbs (3.8 tons) at 100 psi
  • Stroke: 6"
  • Workspace: 14 x 12 x 8"
  • Actuator: Two push buttons
  • Storage dimensions: 23 x 24 x 53"
  • Weight: 250 lbs
  • Additional information for hole locations: bolster plate, bottom mounting bars and striker head.



Vortool Manufacturing

Vortool Manufacturing Ltd.

Unit 240 19358-96 Ave.

Surrey, BC V4N 4C1 Canada


Call: 604-239-7218 | Email


Made in Canada


Custom embossing letter marking stamp set

Custom embossing letter marking stamp set

Custom embossing letter marking stamp set

  • Embossing stamps sets are great for stamping gold, sterling silver, gold bullion, and soft metals by Vortool Manufacturing.

  • Custom made in any size or metal like steel or aluminum.

  • Any combination of letters and numbers A-Z, numbers 0-9, or symbols stored in a durable box.


Custom embossing letter marking stamp set

Custom Embossion Letter Marking Stamp Set


Vortool Manufacturing

Vortool Manufacturing Ltd.

Unit 240 19358-96 Ave.

Surrey, BC V4N 4C1 Canada


Call: 604-239-7218 | Email


Made in Canada



Ball end wire rope crimping and swage die

Ball end wire rope crimping and swage die

Ball end wire rope crimping and swage die


  • Ball end wire rope crimping and swage die is an insert for a hydraulic press.

  • Suitable for 8 mm cable. Available in other sizes.

  • Provides strong and reliable termination.

Take a look at our video above for a demonstration of the ball end wire rope crimping and swaging die in use.


Vortool Manufacturing

Vortool Manufacturing Ltd.

Unit 240 19358-96 Ave.

Surrey, BC V4N 4C1 Canada


Call: 604-239-7218 | Email


Made in Canada


Modular press using multiple punch stations

Modular press using multiple punch stations

The modular press using multiple punch station product line by Vortool Manufacturing Ltd. contain a number of individual (portable) presses that are linked together and activated as one.

• For generic or budget oriented projects C frame presses are the most suitable.

• Other models may be used as well as custom solutions that are designed for the specific need of the process.

• Modular presses are excellent to process aluminum extrusions with great lengths and multiple holes, slots, etc. to be punched at once at the full length of the extrusion.

• The process time is minimal, compared to conventional methods where individual holes had to be drilled or punched one at a time. The quality is more predictable and repeatable.

• Multi axis power unit mounts are available to work horizontally or in an angle within the same machine.

• Drilling units can be also used to work along with the cylinders.

• Extrusion positioning and clamping can be automated. The function can be monitored by a PLC to ensure trouble free operation and keep the required quality under control.

• Safety devices may be installed, depending of your company or government requirements.


Vortool Manufacturing

Vortool Manufacturing Ltd.

Unit 240 19358-96 Ave.

Surrey, BC V4N 4C1 Canada


Call: 604-239-7218 | Email


Made in Canada