Press
SN: 3025
Date: March 4, 2026.
Press information
Weight: 225 lbs
Size: 18" x 18" x 54"
Air connection: “M” style quick connect
Air pressure: 120 psi
Positioning: Laser site with adjust able dot location
Metal stamping to cut 6 different shapes of copper
Punch press
- Air over oil press, 10 ton capacity OS.2.0, PS 0.218
- Air supply requirement: Compressed shop air (120 psi)
- Operator control: foot pedal
Master die set
- It is to house 6 different inner die sets, one for a distinct shape
- Die sets bolted to the bottom and top die shoe, using 4 Socket Head Cap Screws per plate
- Lower locator: two slide fit dowel pins with finger knobs
- Upper locator: two slide fit dowel pins with finger knobs. Upper plate is clearly marked for dowel pins locations, corresponding to the tool number
Die sets (tools)
- Each die set consist of a lower and upper part to be separately mounted. Die sets are numbered and they must be kept in pairs!
- There are blank locator in each die set
Blank sizes for 0.017 thick Copper
- # 3: 3.55 square
- # 5: 4.75 square
- # 7: 4.75 square
- # 8: 3.875 square
- # 9: 4.75 square
- # 11: 5.35 square
12 ton flatbed die cutting punch press for steel rule die
12.5 ton three platen flatbed die cutting press and steel rule die specifications
- Steel rule die size: 6.5" x 15"
- Cylinder: 12.5 tons capacity, 5 /8 overall stroke, 7/32 power stroke
- Structure: Three platen, four post, precision guided die set with pre-set cut depth
- Power source: Compressed air, 120 psi (max), adjustable psi by mounted FRL
- Connection type to air in: “M” style quick connect
- Press style: Bench mount with adjust able height platforms
- Operator control: Two push buttons
- Additional safety: Lexan guards, all sides
- Feed in/out: Manual, visually controlled, rolls or individual blanks or sheets
- Outboard strip support: Comes with two basic wooden platforms. Other sizes or materials are optional.
- Steel rule die (cuts the shape)
- Metal cutting board
Flatbed die cutting press and steel rule die cutout material into custom shapes and designs.
Foot print: 14" x 25"
Total height: 35"
Weight: 525 lbs
Edge bending tool and die of laser cut parts
Edge bending, or wiping die bending is achieved by holding the sheet between a pad and die than sliding the wiping flange across the face and bending the sheet metal which sticks out.
- Low volume part production
- Laser cut metal parts
- Four edges of the laser cut part is bent in bending tool and die. Three of the part edges has a 90 degree angle. The forth edge has a different angle.
Bending tool and die
Footprint: 10" x 18"
Storage height: 7.2
Weight: 205 lbs
Heat treating knife blades in small batches
Heat treating knife blades in small batches and hardness testing.
Folding tool and die
This tool and die bends parallel axis at both edges of the stock forming a cable mounting bracket.
Bending tool and die
This bending die transforms a strip of straight copper to have a curved shape in the middle.
The bending die in the middle is interchangeable sizes to create three different radiuses.
The length of the strip is adjustable with a sliding track.
C-frame punch press and dimple hole stamping tool and die for metal door frames
Multicyl cylinder C-frame punch press
- Air over oil “C” frame bench top punch press
- Tonnage (output): 12.5 ton capacity at 120 psi
- Power requirement: compressed air, 90-120 psi
- Operator control: Foot pedal
- “M” style quick connect to air supply
- FRL to filter air supply, regulate air pressure and lubricate
Metal stamping tool and die
- Punching single dimple holes in 16 – 14 ga thick metal door of different profile sizes, up to 9-1/2 frame
- Tool is easily removable from the press and can be replaced with different sizes if needed.
Cardboard perforating tool and die
Stamping tool and die punches 100 holes in thick corrugated cardboard.
Metal stamping dies
Metal stamping dies can punch various materials such as metal, plastics, paper, etc.. Materials can come in a form of sheet, strip or coil. They can be shaped, like tubing, extrusions, channels, etc.
Check out our metal stamping die projects by Vortool Manufacturing made in Canada.
Multi set up metal stamping die for punching holes
Double D hole punching tool and die
Metal stamping tool to punch oblong holes in curved aluminum extrusion
Multiple station hole punching mandrel tooling for aluminum tubes
Ball end wire rope crimping and swaging die
Custom metal stamping die
Progressive metal stamping die
Precision tool and die maker
Vortool Manufacturing - Precision tool and die maker
• Tool and die design
• Metal stamping die manufacturing
• Tool and die set up solutions
• Tool and die maintenance and repair
• Re-design progressive metal stamping dies
Metal stamping tool and die with engraved punch
In-house metal stamping tool and die design has exchangeable engraved punches to display company logo and part name.
Vortool has in-house CNC and wire EDM machining, surface grinding and heat treating to manufacture metal stamping dies.
Metal stamping die punches different number of slots.
Stock pushers help to move the strip toward.
Nitrogen gas die springs are used in this tool and die to exert force. Gas springs have greater force than coil springs.
Subscribe to:
Posts (Atom)