Heat treating knife blades in small batches and hardness testing.
Edge bending tool and die of laser cut parts
Edge bending, or wiping die bending is achieved by holding the sheet between a pad and die than sliding the wiping flange across the face and bending the sheet metal which sticks out.
- Low volume part production
- Laser cut metal parts
- Four edges of the laser cut part is bent in bending tool and die. Three of the part edges has a 90 degree angle. The forth edge has a different angle.
Bending tool and die
Footprint: 10" x 18"
Storage height: 7.2
Weight: 205 lbs
Folding tool and die
This tool and die bends parallel axis at both edges of the stock forming a cable mounting bracket.
Bending tool and die
This bending die transforms a strip of straight copper to have a curved shape in the middle.
The bending die in the middle is interchangeable sizes to create three different radiuses.
The length of the strip is adjustable with a sliding track.
C-frame punch press and dimple hole stamping tool and die for metal door frames
Multicyl cylinder C-frame punch press
- Air over oil “C” frame bench top punch press
- Tonnage (output): 12.5 ton capacity at 120 psi
- Power requirement: compressed air, 90-120 psi
- Operator control: Foot pedal
- “M” style quick connect to air supply
- FRL to filter air supply, regulate air pressure and lubricate
Metal stamping tool and die
- Punching single dimple holes in 16 – 14 ga thick metal door of different profile sizes, up to 9-1/2 frame
- Tool is easily removable from the press and can be replaced with different sizes if needed.
Cardboard perforating tool and die
Stamping tool and die punches 100 holes in thick corrugated cardboard.
Metal stamping dies
Metal stamping dies can punch various materials such as metal, plastics, paper, etc.. Materials can come in a form of sheet, strip or coil. They can be shaped, like tubing, extrusions, channels, etc.
Check out our metal stamping die projects by Vortool Manufacturing made in Canada.
Multi set up metal stamping die for punching holes
Double D hole punching tool and die
Metal stamping tool to punch oblong holes in curved aluminum extrusion
Multiple station hole punching mandrel tooling for aluminum tubes
Ball end wire rope crimping and swaging die
Custom metal stamping die
Progressive metal stamping die
Precision tool and die maker
Vortool Manufacturing - Precision tool and die maker
• Tool and die design
• Metal stamping die manufacturing
• Tool and die set up solutions
• Tool and die maintenance and repair
• Re-design progressive metal stamping dies
Metal stamping tool and die with engraved punch
In-house metal stamping tool and die design has exchangeable engraved punches to display company logo and part name.
Vortool has in-house CNC and wire EDM machining, surface grinding and heat treating to manufacture metal stamping dies.
Metal stamping die punches different number of slots.
Stock pushers help to move the strip toward.
Nitrogen gas die springs are used in this tool and die to exert force. Gas springs have greater force than coil springs.
Wire EDM cutting
Precision wire EDM cutting available at Vortool. The Fanuc Robotcut C400iC wire EDM machine. cuts accurate shapes of any conductive material including hardened steel.
Maximum workpiece size:
XYZ: 28.7" x 24.8" x 10"
Axis of travel (maximum shape size):
XYZ: 15.7" x 11.8" X 10"
Tolerances: 0.0001” or better
Surface finish: 0.04 μm
Subscribe to:
Posts (Atom)